expose-zymtrace-backend

name: expose-zymtrace-backend description: | Use when configuring external/internal network exposure for an already-installed zymtrace backend — adding NodePort, LoadBalancer, or Ingress (NGINX or AWS ALB) with TLS. Edits the customer's canonical values file in place and applies via helm upgrade --install. Trigger phrases: "expose zymtrace", "expose the gateway", "make zymtrace accessible", "add ingress to zymtrace", "set up ALB for zymtrace", "internal ALB for zymtrace", "set up NGINX ingress for zymtrace", "add TLS to zymtrace", "get a real hostname for zymtrace", "add NodePort to zymtrace", "connect agents from another cluster".

Expose zymtrace Backend

Helps the user expose the gateway service externally. The zymtrace gateway is the single external surface — UI, ingest (gRPC), and symdb (HTTP) all flow through it.

Deep details (LoadBalancer one-liner, ACM cert lookup, cert-manager) live in ${CLAUDE_PLUGIN_ROOT}/skills/expose-zymtrace-backend/reference.md.

Backend must already be installed (helm list -A | grep -i zymtrace shows a release). If not, use install-zymtrace-backend.

Sources of truth

• Live chart values.yaml (ingress + gateway service keys): https://raw.githubusercontent.com/zystem-io/zymtrace-charts/main/charts/backend/values.yaml
• Ingress doc: https://docs.zymtrace.com/install/backend/ingress

Pre-flight: verify the tools

Claude runs

helm version --short && kubectl version --client
kubectl cluster-info | head -2
helm list -A | grep -i zymtrace
kubectl get ingressclass

If helm/kubectl are missing → point to install docs; do not install them. If no zymtrace release exists → wrong skill, route to install-zymtrace-backend.

Pre-resolve what you can

Resolve namespace + release name first. Recommended defaults zymtrace / backend; for an existing release use its namespace and name. Full policy: shared/conventions.md. Commands use <NS> and <REL> as placeholders.

Things you must ask:

• Which exposure mode (table below)?
• Hostname (for ingress paths).
• TLS source (ACM cert ARN for ALB / cert-manager issuer for NGINX / existing TLS secret).

Decision table

Pick the row that fits, then go to Standard flow below.

ALB is HTTPS-only. Never propose HTTP-only ALB exposure, including internal-scheme ALBs. The template always requires an ACM cert ARN.

gRPC backend-protocol depends on the controller. NGINX/Traefik → backend-protocol: "GRPC". ALB → backend-protocol: HTTP + backend-protocol-version: HTTP2 (the 464 trap).

Standard flow

Step 1: Resolve the canonical values file

First ask: does the customer already have a values file for this release?

• Yes → use the filename they give you for the rest of this flow (e.g. acme-zymtrace.yaml, backend-values.yaml). Don't rename — their CI scripts and git history reference that name.
• No → seed zymtrace-custom-values.yaml from the live release. From then on it's canonical.

Claude runs (only if the customer doesn't have a file)

helm get values <REL> -n <NS> > zymtrace-custom-values.yaml
cat zymtrace-custom-values.yaml

See shared/conventions.md for the full rule. Use <values-file> below as a placeholder for whichever filename you settled on.

Step 2: Back up, then edit the canonical file in place

Before any edit, take a timestamped backup so the customer can revert if anything goes wrong:

Claude runs

cp <values-file> <values-file>.bak.$(date +%Y%m%d-%H%M%S)

Tell the user the backup path. See shared/conventions.md § Always back up before writing.

Then use the matching template in values/ as a reference snippet — not a separate file. Read it, then edit the customer's canonical file directly to add or replace the ingress: block (and services.gateway.service: if NodePort).

Things to customize while editing:

• Hostname (ingress.hosts.gateway.host).
• ACM ARN (alb.ingress.kubernetes.io/certificate-arn) for ALB.
• ClusterIssuer name for NGINX (defaults to letsencrypt-prod).
• Scheme toggle for ALB (internal ↔ internet-facing).

Show the diff to the user and get confirmation before saving. If the customer has comments / ordering in their file, preserve them — targeted insert/replace, not a wholesale rewrite.

If the canonical file already has an ingress: block, replace it (don't append a duplicate key).

Step 3: Refresh the Helm repo

Claude runs

helm repo update zymtrace

Mandatory before any helm upgrade — see shared/conventions.md.

Step 4: Confirm with the user before running

Print the exact command + the resolved values (release name, namespace, canonical values-file path, target hostname, TLS source). Wait for explicit confirmation. Do not run on assumed consent.

Step 5: Apply

Claude runs

helm upgrade --install <REL> zymtrace/backend \
  --namespace <NS> \
  -f <values-file> \
  --reset-then-reuse-values \
  --atomic --debug

Single -f — the canonical file already contains the new ingress block from Step 2. --atomic rolls back the helm release on failure; the file edit from Step 2 stays on disk (git lets the user revert it if needed).

ERROR: failed pre-install: timed out waiting for the condition — usually means the ALB / NGINX LB isn't provisioning. Check:

• AWS LBC logs: kubectl logs -n kube-system deploy/aws-load-balancer-controller --tail=50.
• Ingress events: kubectl describe ingress -n <NS>.
• Subnet auto-discovery tags: subnets need kubernetes.io/role/internal-elb=1 (internal) or kubernetes.io/role/elb=1 (internet-facing).

ERROR: ALB returns HTTP 464 to your curl — you set backend-protocol: GRPC instead of backend-protocol: HTTP + backend-protocol-version: HTTP2. Fix and re-apply.

ERROR: TLS cert mismatch (ssl_error_bad_cert_domain in browser) — ACM cert CN/SAN doesn't include the hostname you set under hosts.gateway.host. Issue a new ACM cert or use a hostname that matches.

Step 6: Verify

Claude runs

bash ${CLAUDE_PLUGIN_ROOT}/skills/expose-zymtrace-backend/scripts/verify-exposure.sh <NS> <REL>

Checks: ingress address resolves, TLS handshake succeeds (if TLS), gateway HTTP probe returns a non-5xx response, agent gRPC port is reachable.

Step 7: Recommend the commit

The canonical <values-file> already reflects the deployed state (Step 2 edited it, Step 5 applied it, Step 6 verified it). Recommend the user commit:

git add <values-file>
git commit -m "zymtrace: add <controller> exposure for <NS>/<REL>"

No helm get values refresh needed — the file you edited is the source of truth.

Done

Exit when ALL of the following are true (substitute <NS> / <REL> / <PREFIX>):

• helm status <REL> -n <NS> reports STATUS: deployed and REVISION incremented.
• For ingress: kubectl get ingress -n <NS> shows a populated ADDRESS column (FQDN or IP — may take 1–3 min for cloud LBs).
• For NodePort: kubectl get svc -n <NS> <PREFIX>-gateway shows NodePort and a port in 30000-32767.
• For ingress with TLS: curl -fsI https://<host> returns 2xx/3xx/4xx (not connection-refused / cert error / 5xx).
• DNS resolves (if a hostname was set): dig +short <host> returns the LB address.
• Agent-path smoke test: grpcurl -insecure <host>:443 list (or equivalent) reaches the gateway's gRPC listener. (Optional but recommended before pointing agents at the new exposure.)

Common pitfalls

• NGINX without backend-protocol: "GRPC" → UI works, profiler agents can't push. Always set it.
• ALB with backend-protocol: GRPC → HTTP 464 for UI/health checks. Use HTTP + backend-protocol-version: HTTP2. See reference.md.
• proxy-body-size unset or too small → symbol uploads fail silently.
• NodePort + OIDC without explicit redirectUri → OAuth callback fails because chart can't auto-derive the URL. Set it in the canonical values file when adding NodePort.
• Subnet tagging for AWS LBC — internal needs kubernetes.io/role/internal-elb=1 on private subnets; external needs kubernetes.io/role/elb=1 on public subnets. Missing tags = LB never provisions.
• ACM cert in wrong region — must be the same region as the EKS cluster. Cross-region cert refs are ignored.

Security constraints

• Never propose HTTP-only ALB exposure, including internal-scheme ALBs — ALB is HTTPS-only in this skill. Always require an ACM cert ARN.
• Never issue helm upgrade / helm upgrade --install for this chart without --reset-then-reuse-values. See shared/conventions.md.
• Never create overlay / temporary values files alongside the canonical one. Edit the canonical file in place; helm only ever takes one -f <values-file>.
• Never run helm repo update against the wrong repo or skip it before the upgrade. Stale cache → wrong chart version pulled.
• Never apply without explicit user confirmation showing the resolved command, hostname, TLS source, and the diff of the Step 2 edit.
• Never rely on NodePort for production exposure — no TLS, no host routing, ports collide.
• Never skip Step 6 verification. An ingress with an empty ADDRESS column is not exposed.