add-model

name: add-model description: > Add a new AI model to the Pipelex inference system. Guides through all required steps: backend TOML configuration (OpenAI, Azure, Anthropic, Google, etc.), kit sync, test profile collections, and fixture regeneration. Use when the user says "add a model", "add GPT-X", "add Claude X", "new model", "register a model", "add Gemini X", "support model X", "add model to backend", or any variation of introducing a new AI model to the inference configuration. Also use when the user mentions a model name that doesn't exist in the backend configs yet and wants to add it.

Add a New AI Model

This skill walks through all the steps needed to register a new AI model in the Pipelex inference system. The process touches several files across the codebase and must be done in order to keep everything consistent.

Overview of what needs to happen

1. Identify the model — which provider, what capabilities, what costs
2. Add to backend TOML(s) — the model spec in each relevant backend config
3. Sync kit configs — propagate .pipelex/ changes into pipelex/kit/configs/
4. Add to test profile collections — so the model is available for test selection
5. Run inference tests — verify the model works end-to-end with real API calls (fixtures are auto-regenerated when PROF= is passed)
6. Gateway (manual) — the user handles this separately since it's remote config

Step 1: Gather model information

Before editing any files, collect the following from the user. If the user already provided some of this, confirm what you have and ask only for the missing pieces.

Looking up costs and capabilities

If the user doesn't know the model's pricing or capabilities, look them up on OpenRouter. Read references/openrouter-price-lookup.md for the full API reference, but here's the quick version:

1. Fetch https://openrouter.ai/api/v1/models (for LLMs) or https://openrouter.ai/api/frontend/models?category=image-generation (for image gen models).
2. Filter the response for the model by id or name (e.g., openai/gpt-5.4).
3. Convert prices from per token to per million tokens (multiply by 1,000,000). Example: "prompt": "0.000002" becomes input = 2.0.
4. Map modalities: OpenRouter image -> our images (input) or image (output), OpenRouter file -> our pdf. If "tools" is in supported_parameters, add "structured" to outputs.

Determining which backends

Each provider typically maps to specific backends:

The gateway (pipelex_gateway) is always a separate manual step — its config is fetched remotely. Remind the user about this at the end.

Backend-specific differences

When adding a model to multiple backends, be aware of these differences:

• OpenAI direct: model_id is often omitted (defaults to the section name). SDK is openai_responses. May support pdf in inputs.
• Azure OpenAI: model_id is always required (includes a date suffix like gpt-5.4-2026-03-01). SDK is azure_openai_responses. Inputs typically use images but not pdf. Image gen models use azure_rest_img_gen SDK and need a .rules sub-table.
• Anthropic direct: SDK is anthropic. Uses prompting_target = "anthropic", structure_method = "instructor/anthropic_tools". Often has max_tokens and max_prompt_images.
• Bedrock: SDK is bedrock_converse. Has its own prompting_target.
• Google direct: SDK is google. Uses prompting_target = "gemini", structure_method = "instructor/genai_tools".

Each backend TOML has a [defaults] section — the model entry only needs to specify fields that differ from those defaults. Read the defaults before writing the entry so you include the minimum necessary fields.

Step 2: Add the model to backend TOML files

The backend config files live in two mirrored locations. Edit the .pipelex/ copy (the project config), then sync to kit in the next step.

.pipelex/inference/backends/<backend_name>.toml     # <-- edit this one
pipelex/kit/configs/inference/backends/<backend_name>.toml  # <-- synced by make

How to write the TOML entry

1. Read the target backend TOML file to understand its [defaults] and the existing model entries — match the style and ordering conventions.
2. Place the new model in the right section (models are grouped by series with comment headers like # --- GPT-5.4 Series ---).
3. Quote the section header if the model name contains dots: ["gpt-5.4"].
4. Only include fields that differ from [defaults]. At minimum you need: inputs, outputs, costs. Add model_id if it differs from the name.

Example — adding gpt-5.4 to openai.toml:

# --- GPT-5.4 Series -----------------------------------------------------------
["gpt-5.4"]
inputs = ["text", "images", "pdf"]
outputs = ["text", "structured"]
costs = { input = 2.0, output = 8.0 }
thinking_mode = "manual"

Example — adding gpt-5.4 to azure_openai.toml:

# --- GPT-5.4 Series -----------------------------------------------------------
["gpt-5.4"]
model_id = "gpt-5.4-2026-03-01"
inputs = ["text", "images"]
outputs = ["text", "structured"]
costs = { input = 2.0, output = 8.0 }
thinking_mode = "manual"

Note: Azure typically does not support pdf in inputs and always requires an explicit model_id with a date suffix.

For image generation models on Azure, you also need a .rules sub-table:

["model-name".rules]
prompt = "positive_only"
num_images = "gpt"
aspect_ratio = "gpt"
background = "gpt"
inference = "gpt"
safety_checker = "unavailable"
output_format = "gpt"

Step 3: Sync kit configs

After editing the .pipelex/ files, sync them into pipelex/kit/configs/:

make ukc

This runs rsync from .pipelex/ to pipelex/kit/configs/, keeping them in sync. Then verify:

make ccs

This checks that the two directories match. If it reports differences, something went wrong with the sync.

Step 4: Add to test profile collections

Edit .pipelex-dev/test_profiles.toml to include the new model in the appropriate collection(s).

Collections are organized by model type and manufacturer:

• LLM models go under [collections.llm] in the right manufacturer list (e.g., openai, anthropic, google).
• Image gen models go under [collections.img_gen] in the right list.
• Extract models go under [collections.extract].
• Search models go under [collections.search].

Add the model name to the relevant list, maintaining alphabetical order within each series. For example, adding gpt-5.4 to the OpenAI LLM collection:

[collections.llm]
openai = [
  # ... existing models ...
  "gpt-5.3-codex",
  "gpt-5.4",        # <-- add here
]

Optionally add to specific profiles

If the model should be part of a named test profile (like dev or coverage), add it there too. But usually the collections are enough — profiles reference collections via @collection_name or glob patterns like gpt-*.

Step 5: Run inference tests against the new model

Once the model is registered and fixtures are regenerated, help the user run the integration tests to verify the model actually works end-to-end with real API calls.

Create targeted test profiles — one per backend

IMPORTANT: You must test the model on every backend it was added to, not just one. Create a separate temporary profile for each backend in .pipelex-dev/test_profiles_override.toml (this file is gitignored so it won't pollute the shared config).

For example, if the model was added to both openai and azure_openai:

[profiles.new_model_openai]
description = "Test the newly added model on OpenAI"
backends = ["openai"]
llm_models = ["gpt-5.4"]
img_gen_models = []
extract_models = []
search_models = []

[profiles.new_model_azure]
description = "Test the newly added model on Azure OpenAI"
backends = ["azure_openai"]
llm_models = ["gpt-5.4"]
img_gen_models = []
extract_models = []
search_models = []

Adjust the backends and model list fields based on what type the model is (llm_models, img_gen_models, extract_models, or search_models).

Run tests for EACH backend

For each backend profile, run the inference tests. No need to call make rtm separately — all inference test targets (ti, tip, tl, te, etc.) automatically regenerate fixtures when PROF= is passed on the command line.

# Test on first backend
make test-inference-fast PROF=new_model_openai TEST=TestLLMInference

# Test on second backend
make test-inference-fast PROF=new_model_azure TEST=TestLLMInference

Use the appropriate test class for the model type:

• LLM models: make test-inference-fast PROF=<profile> TEST=TestLLMInference
• Image gen models: make test-inference-fast PROF=<profile> TEST=TestImageGeneration
• Extract models: make test-inference-fast PROF=<profile> TEST=TestExtract
• Search models: make test-inference-fast PROF=<profile> TEST=TestSearch

The PROF parameter selects the test profile (which controls which models are tested), and TEST selects the test class or method to run.

These are live API calls, so they require valid API keys for the backend being tested. If tests fail, check whether the issue is in the model config (wrong model_id, missing capabilities) or in the API key / network setup.

Clean up after testing

Ask the user if they want the temporary profiles removed from test_profiles_override.toml. If they do, clean them up. If not, leave them in place — the file is gitignored so it won't affect anyone else.

Step 6: Gateway (manual — user action required)

Remind the user:

The Pipelex Gateway configuration is fetched from a remote server. You cannot add the model to the gateway from this repo. To make the model available through the gateway, it needs to be added to the remote gateway configuration separately. Once it's there, it will be picked up automatically by Pipelex clients using the gateway backend.

The local file .pipelex/inference/backends/pipelex_gateway.toml only allows overriding sdk and structure_method per model — you cannot define new models in it.

Step 7: Verify everything works

Run the boot sequence test to make sure config loading succeeds:

make tb

This tests the full boot sequence including config loading, which validates that all TOML files parse correctly and model specs are well-formed.

Then run the full quality check:

make agent-check

Checklist summary

Present this checklist to the user at the end so they can confirm everything:

• Model entry added to <backend>.toml in .pipelex/inference/backends/
• Kit configs synced (make ukc + make ccs)
• Model added to collections in .pipelex-dev/test_profiles.toml
• Inference tests pass on every backend the model was added to (make test-inference-fast PROF=... TEST=... per backend — fixtures are auto-regenerated)
• Boot test passes (make tb)
• Quality checks pass (make agent-check)
• Gateway: user will add the model to the remote gateway config separately