deploying-with-isucon-ansible

name: deploying-with-isucon-ansible description: Deploys ISUCON contest code and configs to competition servers using the isucon-ansible layout (Ansible playbook for provisioning + Makefile-over-SSH for the per-benchmark loop). The two deploy commands are make bench (regular deploy, with instrumentation ON) and make maji (final-run deploy, with instrumentation OFF). Use when running benchmarks, deploying app/nginx/MySQL config changes, reassigning roles between servers, or when working in a repo that uses mazrean/isucon-ansible (server.yaml, hosts inventory, .make.env, remote/Makefile).

Deploying with isucon-ansible

ISUCON deployment with this layout is a two-layer workflow:

1. Ansible (server.yaml) — one-shot / occasional. Provisions every competition server: installs tools, clones the contest repo, sets kernel params, installs systemd units for app/nginx/mysql, enables/disables each service based on the host group it belongs to.
2. Makefile (Makefile + remote/Makefile) — every benchmark run. Pulls the latest contest-repo commit on the target server, copies app code + nginx/mysql configs into place, toggles instrumentation (access log, slow query log, app metrics), rebuilds the binary, and restarts services.

Use this skill when you need to push a change and re-benchmark (make bench), do the final scored run (make maji), swap which ISU runs which role (mysql/app/nginx), or read pprof / kataribe / slow query output from a target server.

Repo-specific values (service names, paths, repo URL, host IPs) live in group_vars/all/var.yaml, .make.env, host_vars/isuN, and hosts — never hard-code them; let the existing variables drive everything.

The Two Deploy Commands

There are exactly two end-to-end deploy commands. Pick one based on what the next run is for:

• bench is the default for everyday work: it deploys and turns on every measurement channel (fluent-bit, app metrics endpoint, nginx access_log in kataribe format, MySQL slow_query_log) so the next benchmark produces analyzable data.
• maji ("マジ" = serious / final) is for when you're done iterating and want the highest score: same deploy steps, but every measurement channel is turned off so logging/profiling overhead doesn't cost you points. Use it for the last submitted run.

If in doubt, use bench. Only switch to maji when you explicitly want to sacrifice observability for throughput.

Mental Model

local                                        servers (isu1, isu2, isu3, ...)
─────                                        ──────────────────────────────
ansible-playbook server.yaml ──provision──▶ install tools, deploy systemd
                                             units, enable/disable services
                                             per [active] host-group membership

make bench REMOTE_ID=N ──ssh──▶ remote/Makefile on isuN:
                                  git pull → cp configs → instrumentation ON
                                  → build → restart        (regular deploy)

make maji  REMOTE_ID=N ──ssh──▶ remote/Makefile on isuN:
                                  git pull → cp configs → instrumentation OFF
                                  → build → restart        (final deploy)

The root Makefile does nothing locally except make -C remote $TARGET, where remote/Makefile runs with SHELL=ssh -t -A isu$REMOTE_ID. Every recipe in remote/Makefile therefore executes on the target server over SSH with agent forwarding (so git pull against a private repo works).

Inventory & Role Assignment

hosts defines two kinds of groups:

[isucon]      # all servers — common provisioning runs here
isu1
isu2

[app]         # which servers run the app
isu1
isu2

[mysql]       # which server runs MySQL
isu1

[nginx]       # which servers terminate HTTP
isu1
isu2

[active:children]
app
mysql
nginx

server.yaml then uses active:!app, active:!mysql, active:!nginx patterns to disable the role on every active host that isn't in that role group. So to move MySQL from isu1 to isu2, edit hosts (move isu2 into [mysql], remove from [mysql]) and re-run the playbook — the role swap is declarative.

Each host is bound to its SSH target via host_vars/isuN (ansible_host, ansible_user, ansible_ssh_private_key_file).

Provisioning (run on setup or after host-group changes)

# Install role dependencies once per checkout
ansible-galaxy install -r requirements.yml

# Full provision (all roles, all hosts in [active])
ansible-playbook -i hosts server.yaml

# Re-run a single role only — every role has a tag matching its name
ansible-playbook -i hosts server.yaml --tags nginx
ansible-playbook -i hosts server.yaml --tags mysql,mysql_down
ansible-playbook -i hosts server.yaml --tags repo

The *_down tags are the disable-on-inactive-hosts side; pair them with the enable tag when reshuffling roles.

Local-only monitoring stack (Grafana / Loki / etc., on the operator's machine):

ansible-playbook -i hosts monitor.yaml

Per-Benchmark Loop

REMOTE_ID selects which server to deploy to (isu$REMOTE_ID). It defaults to 1; set it explicitly when deploying to other ISUs. The two top-level deploy commands are:

# Regular deploy (instrumentation ON) — use this for every iteration
make bench REMOTE_ID=1

# Final-run deploy (instrumentation OFF) — use this only for the scored run
make maji REMOTE_ID=1

bench (regular) vs. maji (final): step-by-step

Both share the same deploy steps; the only difference is whether each measurement channel is enabled.

Use bench while iterating (you want the data); use maji for the final scored run (you want max throughput, no logging overhead).

Targeting a Single Subsystem

When you only changed one layer, deploy only that layer:

make app-replace REMOTE_ID=1     # copy app source from cloned repo
make build       REMOTE_ID=1     # rebuild Go binary in BUILD_DIR
make app-restart REMOTE_ID=1     # systemctl restart $APP_SRV_NAME

make nginx-replace REMOTE_ID=1   # cp nginx.conf, conf.d/, sites-available/
make nginx-restart REMOTE_ID=1   # nginx -t, then restart

make mysql-replace REMOTE_ID=1   # cp my.cnf, conf.d/, mysql.conf.d/
make mysql-restart REMOTE_ID=1   # also greps journal for "ignored" config

replace always runs from the freshly-pulled $REPO_DIR, so always make pull (or make bench/maji) before replace to pick up new commits.

Inspection & Profiling

Every diagnostic target also runs over SSH against isu$REMOTE_ID:

make log         REMOTE_ID=1   # journalctl -e -u $APP_SRV_NAME
make log-cont    REMOTE_ID=1   # journalctl -e -f -u $APP_SRV_NAME (follow)
make slow        REMOTE_ID=1   # pt-query-digest on $MYSQL_LOG
make kataribe    REMOTE_ID=1   # kataribe over $NGX_LOG
make mysql       REMOTE_ID=1   # MySQL CLI as the app user
make mysql-root  REMOTE_ID=1   # MySQL CLI as root

pprof / fgprof are local targets — they call go tool pprof -http=... against http://localhost:606$REMOTE_ID/debug/pprof/profile (resp. /debug/fgprof). That URL only resolves if you've SSH-port-forwarded 606$REMOTE_ID from the target server, e.g.:

ssh -L 6061:localhost:6060 isu1     # in another shell, while make pprof runs
make pprof REMOTE_ID=1

Toggling Instrumentation Independently

If you don't want to redeploy just to flip a knob:

make metrics-on   REMOTE_ID=N   # sed-edits ISUTOOLS_ENABLE in $APP_SRV_FILE + daemon-reload
make metrics-off  REMOTE_ID=N
make access-on    REMOTE_ID=N   # rewrites nginx access_log to kataribe format
make access-off   REMOTE_ID=N   # access_log off;
make slow-on      REMOTE_ID=N   # SET GLOBAL slow_query_log=ON, long_query_time=0
make slow-off     REMOTE_ID=N
make fluentbit-enable  REMOTE_ID=N
make fluentbit-disable REMOTE_ID=N

A metrics-* or slow-* flip on its own doesn't restart the app/MySQL — follow with app-restart / mysql-restart if the change must take effect immediately. The bench/maji macros already do this in the right order.

Typical Workflows

"I changed Go code" — regular deploy

make bench REMOTE_ID=1     # regular deploy: pull, replace, instrumentation ON, build, restart
# run benchmark
make kataribe REMOTE_ID=1  # nginx breakdown
make slow     REMOTE_ID=1  # slow query digest

"I changed only nginx config"

# commit + push nginx/ in the contest repo first
make pull          REMOTE_ID=1
make nginx-replace REMOTE_ID=1
make nginx-restart REMOTE_ID=1

"Move MySQL from isu1 to isu2"

1. Edit hosts: move isu2 into [mysql], remove isu1 from it.
2. ansible-playbook -i hosts server.yaml --tags mysql,mysql_down
3. Update app DB host wherever it's configured (commonly group_vars/all/var.yaml's mysql.connection.host, plus the contest app's env/config), commit, push, then make bench REMOTE_ID=<app-host>.

"Final scoring run" — final deploy

make maji REMOTE_ID=1      # final deploy: same as bench, but instrumentation OFF
make maji REMOTE_ID=2
make maji REMOTE_ID=3
# trigger benchmark

Run maji against every active host so logs/metrics are off everywhere. After the scored run finishes, switch back to make bench for the next iteration so measurements come back on.

Pre-flight Checklist

Before the first deploy in a fresh checkout:

• ansible-galaxy install -r requirements.yml ran cleanly
• host_vars/isuN has the right ansible_host / SSH key for each ISU
• hosts [app]/[mysql]/[nginx] reflects the intended topology
• .make.env GIT_REPO / REPO_BRANCH point at the contest repo
• group_vars/all/var.yaml service names + BUILD_CMD match the contest's app (e.g., isuride-go.service for ISUCON14)
• SSH agent forwarding works end-to-end (ssh -A isu1 'ssh -T git@github.com')
• ansible-playbook -i hosts server.yaml completed at least once

Gotchas

• bench is regular; maji is final-only. Don't run maji while iterating — you'll lose the kataribe / slow-query / metrics data you need to decide what to optimize next. Conversely, don't submit a bench-prepped run as the scored run — instrumentation overhead is non-trivial.
• REMOTE_ID is per-invocation, not sticky. make bench / make maji deploys to exactly one server; run it once per active app host.
• replace is destructive on the server side — it cp -r -T's repo contents over /etc/nginx, /etc/mysql, $APP_BASE. Hand-edits on the server are lost on the next deploy. Always edit in the contest repo.
• mysql-restart greps journalctl for ignored to catch silent config-rejection (wrong perms / unknown options). If it fails after a config change, look for chmod/chown issues in $MYSQL_CFG_DIR.
• bench/maji always run backup first, moving the previous access_log + slow_query_log into ~/logs/<unix-timestamp>/ on the server. Pull old logs from there if you need to compare runs.
• active:!role patterns require the host to be in [active]. If you add a new ISU, add it to [isucon] and to at least one of [app]/[mysql]/[nginx], otherwise the disable side won't run on it.
• make pprof/fgprof need port forwarding. They're local-only and hit localhost:606$REMOTE_ID; without an SSH tunnel they'll fail with a connection refused.

Resources

• Ansible inventory patterns (group:!other): https://docs.ansible.com/ansible/latest/inventory_guide/intro_patterns.html
• kataribe (nginx access_log analyzer): https://github.com/matsuu/kataribe
• pt-query-digest (slow query analyzer): https://docs.percona.com/percona-toolkit/pt-query-digest.html