run-litd

name: run-litd description: "Setting up a Bitcoin Lightning node on Ubuntu using litd (Lightning Terminal). Default path: Neutrino-backed single node (fast, no bitcoind needed). Also covers bitcoind-backed routing nodes and the remote signer architecture for production."

Run litd — Node Setup & Remote Signer

Reference for setting up litd (Lightning Terminal) and LND on Ubuntu, including the recommended remote signer architecture that separates key-holding from routing.

Tested on Ubuntu 24.04 LTS. Current target versions: bitcoind v31.0, litd v0.16.1-alpha, LND v0.20.1-beta.

Source scripts: https://github.com/HannahMR/run-litd

Architecture Overview

The remote signer architecture is recommended for production: the signer holds keys and is never internet-exposed; the routing node handles payments. Three files transfer from signer to routing node: tls.cert (rename to signer-tls.cert), signer.macaroon, accounts.json.

Node Setup Options

Default behaviour: unless the user explicitly asks for bitcoind or a source build, always use the Neutrino binary path.

Server Requirements

• Ubuntu 24.04 LTS (also tested on 22.04)
• 2+ CPU cores, 4 GB+ RAM
• Storage: ~10 GB for Neutrino; 80 GB+ for pruned bitcoind node; 800 GB+ for full mainnet node
• For attached-disk full nodes, set datadir=/path/to/disk in bitcoin.conf

Before You Begin

Step 1 — Check sudo access

The setup scripts require root to install binaries to /usr/local/bin/, install packages via apt-get, write systemd service files to /etc/systemd/system/, and run systemctl commands. Check that passwordless sudo is working before doing anything else:

sudo -n true 2>/dev/null && echo "OK" || echo "NEEDS_SETUP"

If the output is NEEDS_SETUP, explain to the user why these permissions are needed — the setup scripts must install binaries to /usr/local/bin/, install packages via apt-get, write systemd service files to /etc/systemd/system/, and run systemctl commands, all of which require root. Claude cannot enter a password interactively, so passwordless sudo must be configured first. Then ask them to run the fix:

"I need you to open a new SSH terminal tab and paste these two commands, then let me know when done. This is a one-time setup for this server. Note that each command pipes through sudo tee — the sudo is required to write to /etc/sudoers.d/, so you will be prompted for your password. Do not remove sudo from the commands."

echo 'Defaults:ubuntu !use_pty' | sudo tee /etc/sudoers.d/ubuntu-nopty > /dev/null
sudo chmod 0440 /etc/sudoers.d/ubuntu-nopty

echo 'ubuntu ALL=(ALL) NOPASSWD: ALL' | sudo tee /etc/sudoers.d/ubuntu-nopasswd > /dev/null
sudo chmod 0440 /etc/sudoers.d/ubuntu-nopasswd

Wait for the user to confirm, then re-run sudo -n true to verify before continuing.

Step 2 — Gather setup details

Ask the user:

1. Which network — signet (testing) or mainnet (production)?
2. Which role is this machine — single node, signer node, or routing node?

Default behaviour: use the Neutrino binary path unless the user explicitly asks for bitcoind or a source build. Neutrino is built into LND — no separate Bitcoin node or service needed. It is ideal for signet and development but not recommended for mainnet production routing nodes due to peer dependency.

Once you have the answers, run sudo -v to cache credentials, then jump to the relevant section below.

Neutrino Setup (Default)

Neutrino is a lightweight SPV Bitcoin client built into LND — no bitcoind installation required. litd still needs its own lit.conf and systemd service; neutrino_setup3.sh handles both.

Important: the setup scripts use interactive read prompts that Claude CLI cannot respond to. Generate the config files directly before running the scripts — each script checks for existing files and skips the interactive config section automatically.

Single node (litd + Neutrino)

This path installs litd with a Neutrino backend. litd provides the web UI and integrated LND node.

Before running the script, ask the user for:

• A UI password (for the litd web interface)
• A node alias

Then generate the config files using the Bash tool. Read ${CLAUDE_SKILL_DIR}/neutrino/neutrino_setup_binary.sh to see the exact config structure the script would produce, then reproduce it with the user's values substituted in:

mkdir -p ~/.lnd ~/.lit
openssl rand -hex 21 > ~/.lnd/wallet_password
chmod 600 ~/.lnd/wallet_password
# Write ~/.lit/lit.conf via heredoc — structure is in neutrino_setup_binary.sh

Once the config files exist, run the install script — it installs litd and skips the interactive config section:

chmod +x ${CLAUDE_SKILL_DIR}/neutrino/neutrino_setup_binary.sh ${CLAUDE_SKILL_DIR}/neutrino/neutrino_setup3.sh
sudo ${CLAUDE_SKILL_DIR}/neutrino/neutrino_setup_binary.sh

After the install script completes, create the wallet automatically:

chmod +x ${CLAUDE_SKILL_DIR}/litd_wallet_create.sh
sudo ${CLAUDE_SKILL_DIR}/litd_wallet_create.sh

This starts litd in the background, creates the wallet via the LND REST API, saves the seed to ~/.lnd/seed_phrase.txt, and stops litd. Prompt the user to back up and delete the seed:

"Your seed phrase has been saved to ~/.lnd/seed_phrase.txt. Back it up to offline storage now — it is your only recovery option. Then delete it: shred -u ~/.lnd/seed_phrase.txt"

Wait for confirmation, then enable auto-unlock and the systemd service:

sudo ${CLAUDE_SKILL_DIR}/neutrino/neutrino_setup3.sh

Neutrino remote signer (signer node only)

This path installs LND only (no litd, no web UI) and uses Neutrino as the Bitcoin backend. The routing node runs litd with bitcoind separately.

Before running the script, ask the user for:

• The IP address of this signer machine (the routing node connects to it over gRPC)
• A node alias

Then generate the config files using the Bash tool. Read ${CLAUDE_SKILL_DIR}/neutrino/remote-signer-neutrino-binary.sh to see the exact config structure the script would produce, then reproduce it with the user's values substituted in:

mkdir -p ~/.lnd
openssl rand -hex 21 > ~/.lnd/wallet_password
chmod 600 ~/.lnd/wallet_password
# Write ~/.lnd/lnd.conf via heredoc — structure is in remote-signer-neutrino-binary.sh

Once the config files exist, run the script:

chmod +x ${CLAUDE_SKILL_DIR}/neutrino/remote-signer-neutrino-binary.sh
sudo ${CLAUDE_SKILL_DIR}/neutrino/remote-signer-neutrino-binary.sh

The script installs LND, skips config generation (files already exist), creates the lnd systemd service, and automatically creates and initialises the wallet via REST — no manual lncli create step needed.

When the script completes, prompt the user to back up the seed:

"Your seed phrase has been saved to ~/.lnd/seed_phrase.txt. Back it up to offline storage now — it is your only recovery option. Then delete it: shred -u ~/.lnd/seed_phrase.txt"

Then follow Step 2 — Transfer Files and Step 3 — Routing Node from the Remote Signer Setup section below.

Bitcoind + litd Setup (explicit request only)

Use this path when the user has specifically asked for a bitcoind-backed node. Run bitcoind first, then litd.

Step 1 — bitcoind

The bitcoind script generates its own RPC password via rpcauth.py — Claude cannot pre-generate it. Before running, tell the user:

"The bitcoind setup script will display an RPC password. Please copy it and paste it back to me when prompted — I'll use it to configure litd. The script will also ask which network you want (signet or mainnet)."

sudo ${CLAUDE_SKILL_DIR}/bitcoind_setup_binary.sh
# Source build alternative: sudo ${CLAUDE_SKILL_DIR}/bitcoind_setup.sh

After the script completes, ask the user: "What RPC password did the script display?" Then store it — you will use it in the next step. Verify bitcoind is running before continuing:

bitcoin-cli -signet getblockchaininfo   # signet
bitcoin-cli getblockchaininfo           # mainnet

Step 2 — litd

Before running the script, ask the user for:

• UI password (for the litd web interface)
• Node alias

Then pre-generate the config files. Read ${CLAUDE_SKILL_DIR}/litd_setup_binary.sh to see the exact config structure, then reproduce it using the network from Before You Begin Step 2, the RPC password from Step 1 above, and the UI password and alias just collected:

mkdir -p ~/.lnd ~/.lit
openssl rand -hex 21 > ~/.lnd/wallet_password
chmod 600 ~/.lnd/wallet_password
# Write ~/.lit/lit.conf via heredoc — structure is in litd_setup_binary.sh

Once config files exist, run the install script — it installs litd and skips the interactive config section:

sudo ${CLAUDE_SKILL_DIR}/litd_setup_binary.sh

After the install script completes, create the wallet automatically:

chmod +x ${CLAUDE_SKILL_DIR}/litd_wallet_create.sh
sudo ${CLAUDE_SKILL_DIR}/litd_wallet_create.sh

This starts litd in the background, creates the wallet via the LND REST API, saves the seed to ~/.lnd/seed_phrase.txt, and stops litd. Prompt the user to back up and delete the seed:

"Your seed phrase has been saved to ~/.lnd/seed_phrase.txt. Back it up to offline storage now — it is your only recovery option. Then delete it: shred -u ~/.lnd/seed_phrase.txt"

Wait for confirmation, then enable auto-unlock and the systemd service:

sudo ${CLAUDE_SKILL_DIR}/litd_setup3.sh

Source build: litd_setup.sh (installs Go/Node/Yarn) → new shell → litd_setup2.sh (builds litd) → source ~/.profile if litd/lncli are not found → create wallet as above → litd_setup3.sh.

Remote Signer Setup

Step 1 — Signer Node

Two options depending on whether bitcoind is available on the signer machine:

Neutrino signer (default — no bitcoind needed):

Follow the pre-generation steps in the Neutrino remote signer section above — collect signer IP and node alias, generate wallet_password and lnd.conf, then run:

chmod +x ${CLAUDE_SKILL_DIR}/neutrino/remote-signer-neutrino-binary.sh
sudo ${CLAUDE_SKILL_DIR}/neutrino/remote-signer-neutrino-binary.sh

bitcoind signer (explicit request only — bitcoind must already be installed and running):

chmod +x ${CLAUDE_SKILL_DIR}/remote-signer/remote-signer-binary.sh
sudo ${CLAUDE_SKILL_DIR}/remote-signer/remote-signer-binary.sh

The script:

1. Installs LND v0.20.1-beta (GPG + SHA256 verified)
2. Creates ~/.lnd/ and generates wallet_password
3. Configures lnd.conf for signing role (no p2p, nolisten=true, gRPC on 0.0.0.0:10009, tlsextraip=<signer-ip>)
4. Creates and starts lnd.service via systemd
5. Generates the wallet seed via REST (/v1/genseed), initialises the wallet, saves seed to ~/.lnd/seed_phrase.txt
6. Exports xpubs: lncli wallet accounts list > ~/.lnd/accounts.json
7. Bakes a minimum-permission signing macaroon: ~/.lnd/signer.macaroon

Immediately after the script completes, back up the seed:

cat ~/.lnd/seed_phrase.txt
shred -u ~/.lnd/seed_phrase.txt

Step 2 — Transfer Files to Routing Node

Copy three files from the signer to the routing node. The signer's TLS cert must be renamed to avoid collision with litd's own cert.

# Run from routing node (or adjust source/destination)
scp ubuntu@<signer-ip>:~/.lnd/tls.cert        ~/.lnd/signer-tls.cert
scp ubuntu@<signer-ip>:~/.lnd/signer.macaroon ~/.lnd/signer.macaroon
scp ubuntu@<signer-ip>:~/.lnd/accounts.json   ~/.lnd/accounts.json

Verify all three files are present before running the routing node script:

ls -la ~/.lnd/signer-tls.cert ~/.lnd/signer.macaroon ~/.lnd/accounts.json

Step 3 — Routing Node

Run on the routing node machine. Bitcoind must already be installed and running. All three signer files must be in ~/.lnd/ before running.

Before running the script, the routing node script also has interactive prompts. Pre-generate the config using the same pattern as the bitcoind + litd section:

1. If bitcoind was just set up on this machine, ask the user for the RPC password it generated. If bitcoind was already running, ask the user for the existing RPC password.
2. Ask the user for: UI password, node alias. (Network is from Before You Begin Step 2; signer IP is from Step 1.)
3. Generate config files. Read ${CLAUDE_SKILL_DIR}/remote-signer/routing-node-binary.sh for the exact lit.conf structure — it includes lnd.remotesigner.* settings pointing at the signer IP from Step 1:

mkdir -p ~/.lnd ~/.lit
openssl rand -hex 21 > ~/.lnd/wallet_password
chmod 600 ~/.lnd/wallet_password
# Write ~/.lit/lit.conf via heredoc — structure is in routing-node-binary.sh

Binary install:

chmod +x ${CLAUDE_SKILL_DIR}/remote-signer/routing-node-binary.sh ${CLAUDE_SKILL_DIR}/remote-signer/routing-node3.sh
sudo ${CLAUDE_SKILL_DIR}/remote-signer/routing-node-binary.sh

The script:

1. Installs litd v0.16.1-alpha (GPG + SHA256 verified)
2. Checks for the three signer files — exits with scp instructions if any are missing
3. Generates ~/.lit/lit.conf with remotesigner.* settings pointing at the signer
4. Pauses — you must create the watch-only wallet before continuing

Create the watch-only wallet (manual step between scripts):

# Start litd without systemd for first-time wallet setup
litd

# In a new terminal — initialise watch-only wallet from signer's xpubs
lncli --network=signet createwatchonly ~/.lnd/accounts.json
# Use the password from ~/.lnd/wallet_password

# Stop litd (Ctrl-C)

Enable auto-unlock and systemd service:

sudo ${CLAUDE_SKILL_DIR}/remote-signer/routing-node3.sh

routing-node3.sh uncomments the wallet unlock lines in lit.conf and creates litd.service.

Source build: routing-node.sh (installs Go/Node/Yarn) → new shell → routing-node2.sh (builds litd) → source ~/.profile if litd/lncli are not found → create watch-only wallet as above → routing-node3.sh.

Verification Commands

# Node info (shows synced_to_chain, synced_to_graph, pubkey)
lncli --network=signet getinfo

# Check wallet balance
lncli --network=signet walletbalance

# List peers
lncli --network=signet listpeers

# Connect to a peer (required before synced_to_graph=true)
lncli --network=signet connect <pubkey>@<host>:<port>

# Check service status
systemctl status litd
systemctl status lnd        # signer node only
systemctl status bitcoind

# Tail logs
journalctl -fu litd
journalctl -fu lnd

# Verify signer connectivity from routing node
lncli --network=signet --macaroonpath=~/.lnd/signer.macaroon \
  --tlscertpath=~/.lnd/signer-tls.cert \
  --rpcserver=<signer-ip>:10009 \
  getinfo

Common Pitfalls