f2s-doc-final

name: f2s-doc-final description: Convert a PDF or MD document into the final-overview-template standard format so f2s-kb-build can later sync topics/index/manifest; triggers: f2s-doc-final、转成概述模板、终稿模版、final-overview-template, final template、convert to final draft

Execution scope: drafts and final documents are both written to .Knowledge/stock-docs/; prefer reading .Knowledge/template/final-overview-template.md as the template.

Orchestration (main / sub agent)

• The semantics of subAgent / switchAgentVerification use the unified entry as the only source of truth: Cursor/Claude read the config-root rules/f2s-flow2spec-unified-entry.*; Codex reads .codex/topics/f2s-flow2spec-unified-entry.md (same source, mirrored by flow2spec init). This section does not restate those semantics.
• Do not split by default: MD / PDF -> final-overview-template conversion is most coherent when the main session completes understanding, template mapping, and finalization in one pass.
• Optional split (only when subAgent=true and the input is large / multi-file; threshold: PDF > 50 pages or > ~5MB of text): a sub agent may produce a draft for template mapping, formatting, and structural transfer; the main agent compares it against the final-overview-template, identifies gaps, asks the user follow-up questions, aligns with the user, and finalizes / accepts the document. A sub agent must not claim the final document is compliant on its own.
• Do not split by default just because "format conversion can be isolated": final compliance depends on template semantics plus business wording, and the main-side acceptance cost usually remains.
• Verification is performed by the writing agent. This skill does not bind to cross-agent verification.

Convert a PDF or MD into the final-overview-template Standard Format (spec -> context)

The user provides at least one argument after this skill: the first argument is a local PDF file path or Markdown file path (required); the second argument (optional) is an output file path and overrides the default output location. Execute the following workflow based on the file type, and output a final-style Markdown document that can later be consumed by f2s-kb-build.

The final-overview-template is only guidance: if .Knowledge/template/final-overview-template.md exists, read it as a structural reference. Do not force an exact template fit.

Embedded Template Structure (Use When .Knowledge/template/final-overview-template.md Does Not Exist)

Standard requirements:

• Level-1 heading: design name (for example # xxx Technical Design).
• Level-2 headings should include at least: ## Core Concepts, ## Business Rules, ## Key Flows; add or remove others as needed (for example status and transitions, APIs, configuration/table design/error codes, implementation locations and integration approach).
• Core concepts: use a table listing terms, entities, and key IDs (columns: concept, description).
• Status and transitions: if there is a state machine, list states and transitions; otherwise summarize briefly or omit.
• Business rules: list constraints, validations, and configuration items.
• Key flows: describe the main user-side or system-side flows; list flow name, brief steps, entry API/method, and result.
• Optional sections: APIs, configuration/table design/error codes, implementation locations and integration approach. Keep and fill them as needed.

Flow 1: The User Provides Markdown (.md)

1. Read the .md file provided by the user.
2. Reference format (not mandatory): if .Knowledge/template/final-overview-template.md exists, read it as structural guidance; otherwise use the embedded template structure below.
3. Analyze and convert:

• Understand the source topic and structure, and extract the "design name", "core concepts", "business rules", "key flows", and other source-relevant sections (such as status and transitions, APIs, configuration/table design/error codes, implementation locations, and so on).
• Reorganize the content into clear final-style Markdown: the level-1 heading is the design name; the document should include at least the three level-2 headings Core Concepts, Business Rules, and Key Flows; add or remove other sections according to the source and need. Table/list formatting may reference the template but does not need to match exactly.
• If the source lacks a section, mark it as （待补充） or infer and complete it from the source. If the source structure is already clear, keep the original section names.

4. Output:

• Default output is .Knowledge/stock-docs/<design-name>_final.md (the final artifact includes the _final marker).
• If the user specifies an output path as the second argument, use that path; otherwise use the default.

5. Reply: tell the user that .Knowledge/stock-docs/<design-name>_final.md has been generated, and say they may continue with f2s-kb-build to sync .Knowledge/topics, .Knowledge/index.md, and manifest if needed.

Flow 2: The User Provides a PDF (.pdf)

Complete this in two stages: first PDF -> draft MD, then after user confirmation draft MD -> template-format MD.

Step A: First Execution (PDF Path Provided)

1. Try to read the PDF: read the PDF from the user-provided path (absolute or relative to the project root, for example .Knowledge/stock-docs/xxx.pdf).

• If the current environment can parse PDF text: extract the body and convert it to a Markdown draft (preserve heading hierarchy, lists, paragraphs, and tables if recognizable).
• If the PDF cannot be read directly (for example only binary data is available): ask the user to export the PDF content to .Knowledge/stock-docs/xxx.md and then run the skill again.

2. Generate the draft:

• Save the extracted content as .Knowledge/stock-docs/<design-name>_draft.md (infer the design name from the PDF filename or first heading).
• In the reply, show the full draft or its main structure, and clearly state:
  • "The draft has been saved as .Knowledge/stock-docs/<design-name>_draft.md; please review and edit it."
  • "After confirming it is correct, run: f2s-doc-final .Knowledge/stock-docs/<design-name>_draft.md."

3. Do not perform template-format conversion in this round. This round only completes PDF -> draft MD.

Step B: Second Execution After User Confirmation (Draft .md Path Provided)

When the user runs this skill again with the draft .md path (for example .Knowledge/stock-docs/技术方案设计_draft.md):

• Execute Steps 2-5 from "Flow 1: The User Provides Markdown": read the format guidance -> analyze and convert -> output template-format content.
• Output suggestion: generate .Knowledge/stock-docs/<design-name>_final.md.
• Reply: tell the user the standardized version has been generated, and say they may continue with f2s-kb-build to sync .Knowledge/topics and the index.

Path and Output Conventions

• All paths are relative to the project root. Drafts and final documents are both placed under .Knowledge/stock-docs/.
• Input: the first argument is a required file path, such as .Knowledge/stock-docs/方案.pdf or .Knowledge/stock-docs/方案_draft.md; the second argument is optional.
• Output:
  • First PDF run: .Knowledge/stock-docs/<design-name>_draft.md
  • MD or draft MD: .Knowledge/stock-docs/<design-name>_final.md
• If .Knowledge/stock-docs/ does not exist, create it before writing.

Constraints and Notes

• During conversion, do not copy the source verbatim. Extract, summarize, and complete it according to the template so core concepts, business rules, and key flows are easy to find.
• It is recommended, but not mandatory, to keep the three level-2 headings Core Concepts, Business Rules, and Key Flows. Add or remove other sections based on the source and need. The final-overview-template is guidance only and is not mandatory.
• End with a one-sentence summary: the generated draft/final path and the next step, f2s-kb-build, for syncing knowledge routing topics and indexes.