By name: mtv-docs description: Find Red Hat MTV 2.11 documentation links. Use when the user asks about MTV documentation, how to plan or run migrations, provider setup, troubleshooting, performance tuning, hooks, validation rules, storage/network mapping, VDDK, live migration, or any Migration Toolkit for Virtualization topic.
MTV 2.11 Documentation Guide
Use this TOC to suggest the most relevant documentation link when a user asks about MTV topics.
Always link to the specific section using a deep link (Base URL + #anchor), not just the chapter.
How to construct deep links
Red Hat single-page HTML docs use fragment anchors to point to specific sections.
Build a deep link by appending #<anchor_id> to the base URL of the guide:
<base_url>#<anchor_id>
Example — link to the section on creating a VDDK image:
https://docs.redhat.com/en/documentation/migration_toolkit_for_virtualization/2.11/html-single/planning_your_migration_to_red_hat_openshift_virtualization/index#creating-vddk-image_mtv
When answering a user question, pick the most specific anchor that matches the topic and present it as a clickable markdown link.
Planning Guide
Base URL: https://docs.redhat.com/en/documentation/migration_toolkit_for_virtualization/2.11/html-single/planning_your_migration_to_red_hat_openshift_virtualization/index
Chapter / section anchor reference
| Ch. | Section | Anchor ID | Description |
|---|---|---|---|
| 1 | Planning a migration | con_planning-intro_mtv |
Overview of supported source providers and migration types |
| 1.1 | Types of migration | types_of_migration |
Cold, warm, and live migration types |
| 2 | Cold and warm migration | assembly_cold-warm-migration_mtv |
Differences between cold and warm migration |
| 2.1 | About cold and warm migration | about-cold-warm-migration_mtv |
Choose cold or warm based on workload |
| 2.1.1 | Cold migration | cold-migration_mtv |
Default migration type, VMs shut down during copy |
| 2.1.2 | Warm migration | warm-migration_mtv |
Precopy while VMs run, cutover with minimal downtime |
| 2.2 | Warm migration stages | warm-migration-stages_mtv |
Precopy and cutover stages overview |
| 2.2.1 | Precopy stage | precopy_stage |
CBT snapshots at hourly intervals |
| 2.2.2 | Cutover stage | cutover_stage |
VMs shut down, remaining data migrated |
| 2.3 | Migration speed comparison | mtv-migration-speed-comparison_mtv |
Speed comparison of cold and warm |
| 2.4 | Choosing a migration type | choosing-migration-type_mtv |
Decision guide table for cold vs warm |
| 3 | Live migration | assembly_live-migration_mtv |
GA, OCP Virt ↔ OCP Virt clusters |
| 3.1 | Benefits of live migration | benefits-live-migration_mtv |
Day 2 ops, minimal downtime |
| 3.2 | Live migration, MTV, and OCP Virt | live-migration-mtv-cnv_mtv |
Orchestration split between MTV and KubeVirt |
| 3.3 | Limitations of live migration | live-migration-limitations_mtv |
OCP Virt only, no cross-provider |
| 3.4 | Live migration workflow | live-migration-workflow_mtv |
Step-by-step lifecycle |
| 4 | Software requirements | assembly_software-requirements-for-migration_mtv |
Storage, network, VM prerequisites |
| 4.1 | Storage support / default modes | about-storage_mtv |
Volume and access modes per provisioner |
| 4.2 | Network prerequisites | network-prerequisites_mtv |
IP/VLAN, reliability, NADs |
| 4.2.1 | Ports | ports_mtv |
Firewall port tables per provider |
| 4.3 | Source VM prerequisites | ref_source-vm-prerequisites_mtv |
ISO unmounted, IPv4/IPv6, supported OS |
| 4.4 | Source VM migration considerations | ref_source-vm-migration-considerations_mtv |
DNS naming, Windows VSS, Secure Boot |
| 4.5 | MTV encryption support | encryption-support_mtv |
LUKS and BitLocker support |
| 5 | Provider-specific requirements | assembly_provider-specific-requirements-for-migration_mtv |
Per-provider prereqs |
| 5.1 | RHV prerequisites | rhv-prerequisites_mtv |
UserRole, ReadOnlyAdmin, LUN disks |
| 5.2 | OpenStack prerequisites | openstack-prerequisites_mtv |
Token and app-credential auth |
| 5.2.1 | OpenStack token auth | openstack-token-authentication_mtv |
Token with user ID or user name |
| 5.2.2 | OpenStack app credential auth | openstack-application-credential-authentication_mtv |
App credential ID or name |
| 5.3 | VMware prerequisites | vmware-prerequisites_mtv |
VDDK, CBT, NFC, privileges |
| 5.3.1 | VMware privileges | vmware-privileges_mtv |
Minimum vSphere privilege table |
| 5.3.2 | Creating VMware role | creating-vmware-role-mtv-permissions_mtv |
Apply MTV privileges in vCenter |
| 5.3.3 | Creating VDDK image | creating-vddk-image_mtv |
Build and push VDDK init image |
| 5.3.4 | Increasing NFC memory | increasing-nfc-memory-vmware-host_mtv |
Required for >10 VMs per ESXi host |
| 5.3.5 | VDDK validator containers | vddk-validator-containers_mtv |
Resource quotas for VDDK pods |
| 5.4 | OVA prerequisites | ova-prerequisites_mtv |
NFS share layout, folder scanning |
| 5.5 | OpenShift Virt prerequisites | cnv-prerequisites_mtv |
Matching MTV versions, OCP Virt 4.16+ |
| 5.5.1 | Live migration prerequisites | cnv-cnv-live-prerequisites_mtv |
MTV 2.10+, OCP Virt 4.20+, DecentralizedLiveMigration feature gate |
| 5.6 | Software compatibility | compatibility-guidelines_mtv |
Version matrix: OCP 4.21/4.20/4.19, vSphere 6.5+, RHV 4.4 SP1+, OpenStack 16.1+ |
| 5.6.1 | Operator life cycles | openshift-operator-life-cycles |
Link to OCP operator lifecycle |
| 6 | Installing / configuring MTV | assembly_installing-mtv-operator_mtv |
Install and configure the operator |
| 6.1 | Install via web console | installing-mtv-operator_web |
UI-based install steps |
| 6.2 | Install via CLI | installing-mtv-operator_cli |
CLI manifests for install |
| 6.3 | Configuring MTV Operator | configuring-mtv-operator_mtv |
ForkliftController CR settings |
| 6.4 | MTV Operator parameters | ref_mtv-operator-parameters_mtv |
Full parameter table |
| 6.5 | Max VM inflight | ref_max-concurrent-vms_mtv |
controller_max_vm_inflight tuning |
| 7 | Migrating VMs via web console | assembly_migrating-vms-web-console_mtv |
MTV UI walkthrough |
| 7.1 | Navigating MTV pages | navigating-mtv-pages_mtv |
Providers, Migration plans, Mappings, Overview pages |
| 7.2 | The MTV user interface | mtv-ui_mtv |
UI layout overview |
| 7.2.1 | Tips and tricks panel | tips-and-tricks-panel_mtv |
Contextual guidance dropdown for providers, migration, troubleshooting |
| 7.3 | MTV Overview page | mtv-overview-page_mtv |
Overview page tabs |
| 7.3.1 | Overview tab | overview-tab_mtv |
Charts, health, welcome section |
| 7.3.2 | YAML tab | overview-yaml-tab_mtv |
ForkliftController CR editor |
| 7.3.3 | Health tab | overview-health-tab_mtv |
Pod status table and conditions |
| 7.3.4 | History tab | overview-history-tab_mtv |
Migration history with filters |
| 7.3.5 | Settings tab | overview-settings-tab_mtv |
Max concurrent VMs, CPU/memory limits, precopy interval, transfer network |
| 7.3.6 | Controller transfer network | choosing-controller-transfer-network_mtv |
Select a different controller transfer network |
| 7.4 | Preparing VMs for migration | preparing-vms-for-migration_mtv |
Pre-migration VM configuration tasks |
| 7.4.1 | Renaming VMs | proc_renaming-vms-for-migration_mtv |
DNS-compliant name adjustments |
| 7.4.2 | Target power state | proc_configuring-target-power-state-vms_mtv |
off / on / auto per VM |
| 8 | Migrating VMs via CLI | assembly_migrating-vms-cli_mtv |
CLI-based migration |
| 8.1 | Non-admin permissions | non-admin-permissions_cli |
RBAC roles for plan components |
| 9 | Network and storage mapping | assembly_mapping-networks-storage_mtv |
Maps concepts |
| 9.1 | About network maps | about-network-maps_mtv |
Plan-specific vs ownerless |
| 9.2 | About storage maps | about-storage-maps_mtv |
Plan-specific vs ownerless |
| 9.3 | Ownerless storage maps | con_creating-ownerless-storage-maps-ui_mtv |
Creating ownerless maps |
| 10 | VMware migration planning | assembly_planning-migration-vmware_mtv |
Full VMware planning chapter |
| 10.4 | Storage copy offload | about-storage-copy-offload_vmware |
XCOPY-based accelerated migration (GA for cold, Tech Preview for warm) |
| 10.4.1 | How SCO works | how-storage-copy-offload-works_vmware |
Array-level disk cloning |
| 10.4.2 | Supported storage providers | storage-copy-offload-works-supported-providers_vmware |
Hitachi, NetApp, Pure, Dell, HPE, Infinidat, IBM |
| 10.4.3 | SCO planning steps | proc_storage-copy-offload-steps_vmware |
Pre-migration checklist |
| 10.4.4 | SCO cloning methods | con_copy-methods-sco_vmware |
VIB vs SSH methods |
| 10.4.4.1 | SSH advantages | advantages_of_the_ssh_method |
No VIB install needed |
| 10.4.4.2 | SCO VIB setup | proc_storage-copy-offload-vib-set-up_vmware |
Install VIB on ESXi |
| 10.4.4.3 | SCO SSH setup | proc_storage-copy-offload-general-ssh-set-up_vmware |
SSH key configuration |
| 10.4.4.3.2 | SSH security recs | security_recommendations |
Key rotation, short-lived keys |
| 10.4.4.3.3 | SCO auto SSH keys | proc_storage-copy-offload-auto-ssh-set-up_vmware |
Auto-generated RSA keys |
| 10.4.4.3.4 | SCO manual SSH keys | proc_storage-copy-offload-manual-ssh-set-up_vmware |
Manually generated restricted keys |
| 10.4.5 | SCO via UI | proc_storage-copy-offload-ui_vmware |
UI wizard with copy offload |
| 10.5 | Adding VMware provider | adding-source-provider_vmware |
vCenter / ESXi source provider |
| 10.6 | VMware migration network | selecting-migration-network-for-vmware-source-provider_vmware |
NFC network selection |
| 10.7 | Adding OCP Virt dest provider | adding-source-provider_dest_vmware |
Destination provider for VMware plans |
| 10.8 | OCP Virt migration network | selecting-migration-network-for-virt-provider_dest_vmware |
Transfer network for destination |
| 10.9 | VMware plan wizard | creating-plan-wizard-vmware_vmware |
Step-by-step plan creation |
| 10.10 | VMware plan settings | configuring-vmware-plan-settings_vmware |
Volume/PVC/network name templates, raw copy mode, VM scheduling, affinity |
| 10.11 | LUKS-encrypted disks | con_migration-of-luks-encrypted-disks_vmware |
Migrating encrypted VMs |
| 10.12 | NBDE with Clevis | proc_enabling-nbde-with-clevis_vmware |
Network-Bound Disk Encryption |
| 10.13 | Scheduling importer pods | about-scheduling-importer-pods_vmware |
Schedule destination nodes for virt-v2v importer pods (cold VMware only) |
| 11 | RHV migration planning | assembly_planning-migration-rhv_mtv |
Full RHV planning chapter |
| 11.4 | Adding RHV provider | adding-source-provider_rhv |
RHV source provider setup |
| 11.7 | RHV plan wizard | creating-plan-wizard-rhv_rhv |
RHV migration plan creation |
| 12 | OpenStack migration planning | assembly_planning-migration-osp_mtv |
Full OpenStack planning chapter |
| 12.4 | Adding OpenStack provider | adding-source-provider_ostack |
OpenStack source provider setup |
| 12.7 | OpenStack plan wizard | creating-plan-wizard-ostack_ostack |
OpenStack migration plan creation |
| 13 | OVA migration planning | assembly_planning-migration-ova_mtv |
Full OVA planning chapter |
| 13.4 | Adding OVA provider | adding-source-provider_ova |
OVA source provider setup |
| 13.7 | OVA plan wizard | creating-plan-wizard-ova_ova |
OVA migration plan creation |
| 13.8 | OVA web upload | proc_configuring-ova-web-upload_ova |
Upload OVA files via browser to NFS share |
| 14 | OCP Virt migration planning | assembly_planning-migration-cnv_mtv |
Full OCP Virt planning chapter |
| 14.4 | Adding OCP Virt source provider | adding-source-provider_cnv |
OCP Virt source provider setup |
| 14.7 | OCP Virt plan wizard | creating-plan-wizard-cnv_cnv |
OCP Virt migration plan creation |
| 14.7.1 | Live migration plan wizard | creating-plan-wizard-cnv-live_cnv |
Live migration plan creation |
Migration Guide
Base URL: https://docs.redhat.com/en/documentation/migration_toolkit_for_virtualization/2.11/html-single/migrating_your_virtual_machines_to_red_hat_openshift_virtualization/index
Chapter / section anchor reference
| Ch. | Section | Anchor ID | Description |
|---|---|---|---|
| 1 | Performing a migration | con_performing-migration-intro_mtv |
Overview of running migrations |
| 2 | Migrating from VMware | assembly_migrating-from-vmware_mtv |
VMware migration via UI and CLI |
| 2.2 | Running VMware plan (UI) | running-migration-plan_vmware |
Start a VMware migration plan |
| 2.2.1 | Migration plan options | migration-plan-options-ui_vmware |
Edit, duplicate, archive, delete plans |
| 2.2.2 | Cancel VMware migration (UI) | canceling-migration-ui_vmware |
Cancel in-progress migration via UI |
| 2.3 | VMware CLI migration | proc_migrating-vms-cli-vmware_vmware |
Full CLI manifests for VMware |
| 2.4 | Storage copy offload CLI | proc_storage-copy-offload-cli_vmware |
CLI-based SCO migration |
| 2.4.1 | VMware moRef retrieval | retrieving-vmware-moref_vmware |
Get Managed Object Reference IDs |
| 2.4.2 | Shared disks | mtv-shared-disks_vmware |
Multi-writer shared disk handling |
| 2.4.3 | MTV template utility | mtv-template-utility_vmware |
Go template utility for VM names |
| 3 | Migrating from RHV | assembly_migrating-from-rhv_mtv |
RHV migration via UI and CLI |
| 3.2 | Running RHV plan (UI) | running-migration-plan_rhv |
Start an RHV migration plan |
| 3.3 | RHV CLI migration | proc_migrating-vms-cli-rhv_rhv |
Full CLI manifests for RHV |
| 4 | Migrating from OpenStack | assembly_migrating-from-osp_mtv |
OpenStack migration via UI and CLI |
| 4.2 | Running OpenStack plan (UI) | running-migration-plan_ostack |
Start an OpenStack migration plan |
| 4.3 | OpenStack CLI migration | proc_migrating-vms-cli-ostack_ostack |
Full CLI manifests for OpenStack |
| 5 | Migrating from OVA | assembly_migrating-from-ova_mtv |
OVA migration via UI and CLI |
| 5.3 | Running OVA plan (UI) | running-migration-plan_ova |
Start an OVA migration plan |
| 5.4 | OVA CLI migration | proc_migrating-vms-cli-ova_ova |
Full CLI manifests for OVA |
| 6 | Migrating from OCP Virt | assembly_migrating-from-virt_mtv |
OCP Virt migration via UI and CLI |
| 6.2 | Running OCP Virt plan (UI) | running-migration-plan_cnv |
Start an OCP Virt migration plan |
| 6.3 | OCP Virt CLI migration | proc_migrating-vms-cli-cnv_cnv |
CLI walkthrough for OCP Virt cold migration |
| 6.4 | Live migration CLI | migrating-live-cnv-cnv-vms-cli_cnv |
CLI walkthrough for live migration |
| 7 | Advanced migration options | assembly_advanced-migration-options_mtv |
Hooks, validation, UDN, scheduling |
| 7.1 | Warm migration precopy intervals | changing-precopy-intervals_mtv |
Adjust snapshot intervals |
| 7.2 | Custom validation rules | con_creating-custom-rules-validation_mtv |
OPA Rego validation rules |
| 7.2.1 | About Rego files | about-rego-files_mtv |
Rego file structure |
| 7.2.2 | Default validation rules | accessing-default-validation-rules_mtv |
View built-in rules |
| 7.2.3 | Creating validation rules | proc_creating-validation-rules_mtv |
Write and apply custom rules |
| 7.2.4 | Inventory rules version | updating-inventory-rules-version_mtv |
Update validation rules version |
| 7.2.5 | Inventory service JSON | retrieving-inventory-service-json_mtv |
Retrieve inventory JSON |
| 7.3 | Pre/post-migration hooks | about-hooks-for-migration-plans_mtv |
Ansible playbook hooks |
| 7.3.1 | Hook workflow | hook-execution_mtv |
How hooks run during migration |
| 7.3.2 | Add hook via UI | adding-migration-hook-via-ui_mtv |
UI-based hook configuration |
| 7.3.3 | Add hook via CLI | adding-migration-hook-via-cli_mtv |
CLI-based hook configuration |
| 7.4 | User-defined networks (UDN) | about-udn_mtv |
UDN support for migrations |
| 7.5 | Target VM scheduling | con_scheduling-target-vms-intro_mtv |
Node selector, affinity, labels |
| 7.5.1 | About scheduling target VMs | target-vm-scheduling-about_mtv |
Scheduling concepts |
| 7.5.2 | Scheduling prerequisites | target-vm-scheduling-prerequisites_mtv |
Requirements for scheduling |
| 7.5.3 | Scheduling options | target-vm-scheduling-options_mtv |
Available scheduling features |
| 7.5.4 | Scheduling via CLI | configuring-target-vm-scheduling-cli_mtv |
CLI-based scheduling config |
| 7.5.5 | Scheduling via UI | configuring-target-vm-scheduling-ui_mtv |
UI-based scheduling config |
| 8 | Upgrading / uninstalling MTV | assembly_upgrading-uninstalling-mtv_mtv |
Upgrade and uninstall |
| 8.1 | Upgrade MTV | upgrading-mtv-ui_mtv |
Upgrade procedure |
| 8.2 | Uninstall via UI | uninstalling-mtv-ui_mtv |
UI-based uninstall |
| 8.3 | Uninstall via CLI | uninstalling-mtv-cli_mtv |
CLI-based uninstall |
| 9 | Understanding MTV migration | assembly_understanding-mtv-migration_mtv |
CRs, services, workflows |
| 9.1 | Custom resources / services | mtv_custom_resources |
CR reference |
| 9.1.1 | MTV custom resources | mtv-custom-resources_mtv |
Custom resource list |
| 9.1.2 | MTV services | mtv_services |
Service reference |
| 9.2 | High-level migration workflow | mtv-workflow_mtv |
High-level migration pipeline |
| 9.2.1 | Detailed migration workflows | detailed-migration-workflows_mtv |
Per-provider workflows |
| 9.2.2 | How MTV uses virt-v2v | virt-v2v-mtv_mtv |
virt-v2v conversion process |
| 9.2.3 | Raw copy mode | raw-copy-mode_mtv |
Copy without virt-v2v conversion |
| 9.2.4 | Device compatibility mode | con_device-compatibility-mode-raw-copy-migrations_mtv |
SATA/E1000E compatibility devices |
| 10 | Troubleshooting | assembly_troubleshooting-migration_mtv |
Debugging failed migrations |
| 10.1 | Troubleshooting workflow | troubleshooting-workflow_mtv |
Step-by-step troubleshooting guide |
| 10.2 | Common migration issues | common-migration-issues_mtv |
Frequent problems and solutions |
| 10.3 | Error messages | error-messages_mtv |
Common error reference |
| 10.3.1 | Warm import retry limit | resolving-warm-import-retry_mtv |
Resolve warm import retry errors |
| 10.3.2 | Disk resize errors | resolving-disk-resize_mtv |
Resolve disk resize errors |
| 10.3.3 | OVA connection errors | resolving-ova-connection_mtv |
Resolve OVA connection test errors |
| 10.3.4 | VDDK image pull errors | resolving-vddk-image-pull_mtv |
Resolve VDDK image pull errors |
| 10.3.5 | VDDK vSAN errors | resolving-vddk-vsan_mtv |
Resolve VDDK vSAN errors |
| 10.4 | SCO troubleshooting | con_troubleshooting-storage-copy-offload_mtv |
Storage copy offload issues |
| 10.4.1 | vSphere-ESXi connectivity | vsphere-esxi-connectivity_mtv |
ESXi connectivity troubleshooting |
| 10.4.2 | SSH error messages | ssh-error-messages_mtv |
SSH-related SCO errors |
| 10.4.3 | NetApp errors | netapp-errors_mtv |
NetApp-specific SCO errors |
| 10.5 | must-gather | using-must-gather_mtv |
Collect diagnostic data |
| 10.6 | Collected logs / CR info | collected-logs-cr-info_mtv |
What must-gather collects |
| 10.6.1 | Logs via UI | accessing-logs-ui_mtv |
UI log access |
| 10.6.2 | Logs via CLI | accessing-logs-cli_mtv |
CLI log access |
| 11 | Performance recommendations | assembly_mtv-performance-recommendations_mtv |
Optimize migration speed |
| 11.1 | Fast storage/network | ref_fast-storage-network-speeds_mtv |
Storage and network speed guidance |
| 11.2 | Fast datastore reads | ref_fast-datastore-read-speeds_mtv |
Datastore read optimization |
| 11.3 | Endpoint types | ref_endpoint-types_mtv |
vCenter vs ESXi endpoints |
| 11.4 | ESXi performance | mtv-esxi-performance_mtv |
ESXi-specific tuning |
| 11.4.1 | Single ESXi host | mtv-single-esxi-host-performance_mtv |
Single-host limits |
| 11.4.2 | Multiple ESXi hosts | mtv-multiple-esxi-host-performance_mtv |
Multi-host scaling |
| 11.5 | Migration network performance | mtv-different-migration-network-performances_mtv |
Network comparison |
| 11.6 | Avoid network load | ref_avoid-network-load_mtv |
Migration network best practices |
| 11.7 | Concurrent disk migrations | ref_control-concurrent-disk-migrations_mtv |
Parallel disk tuning |
| 11.8 | Concurrent migrations | ref_concurrent-migrations-faster-migrations_mtv |
Parallel VM tuning |
| 11.9 | Multiple hosts | ref_multiple-hosts-faster-migrations_mtv |
Multi-host performance |
| 11.10 | Plan sizing | ref_multiple-migration-plans-vs-single_mtv |
One large vs many small plans |
| 11.11 | Max cold migration values | ref_maximum-values-cold-migrations_mtv |
Cold migration throughput |
| 11.12 | Warm migration recs | ref_warm-migration-recommendations_mtv |
Warm-specific tuning |
| 11.13 | Max warm migration values | ref_maximum-values-warm-migrations_mtv |
Warm migration throughput |
| 11.14 | Large disks | ref_migrating-vms-large-disks_mtv |
Large disk migration guidance |
| 11.15 | AIO/NBD buffer tuning | mtv-aio-buffer_mtv |
AIO buffer overview |
| 11.15.3 | Enable AIO buffer | mtv-enable-aio-buffer_mtv |
Enable AIO buffer |
| 11.15.4 | Disable AIO buffer | mtv-disable-aio-buffer_mtv |
Disable AIO buffer |
| 11.16 | Performance addendum | mtv-performance-addendum_mtv |
Additional performance data |
| 12 | Telemetry | mtv-telemetry_mtv |
MTV telemetry data collection |
Quick Topic Finder
Use this section to match user questions to the right deep link.
Format: <Base URL>#<anchor_id>
- "How do I install MTV?" → Planning
#assembly_installing-mtv-operator_mtv - "What are the VMware prerequisites?" → Planning
#vmware-prerequisites_mtv - "How do I set up VDDK?" → Planning
#creating-vddk-image_mtv - "Cold vs warm migration?" → Planning
#assembly_cold-warm-migration_mtv - "How do I choose migration type?" → Planning
#choosing-migration-type_mtv - "What is live migration?" → Planning
#assembly_live-migration_mtv - "How do I create a migration plan?" → Planning
#navigating-mtv-pages_mtv(UI) or#assembly_migrating-vms-cli_mtv(CLI) - "How do I map networks/storage?" → Planning
#assembly_mapping-networks-storage_mtv - "How do I run a VMware migration?" → Migration
#running-migration-plan_vmware - "How do I migrate from RHV?" → Migration
#assembly_migrating-from-rhv_mtv - "How do I migrate from OpenStack?" → Migration
#assembly_migrating-from-osp_mtv - "How do I migrate OVA files?" → Migration
#assembly_migrating-from-ova_mtv - "How do I upload OVA files?" → Planning
#proc_configuring-ova-web-upload_ova - "How do I use hooks?" → Migration
#about-hooks-for-migration-plans_mtv - "How do I add custom validation rules?" → Migration
#con_creating-custom-rules-validation_mtv - "Migration is failing / troubleshooting" → Migration
#assembly_troubleshooting-migration_mtv - "Common migration issues?" → Migration
#common-migration-issues_mtv - "How do I improve migration speed?" → Migration
#assembly_mtv-performance-recommendations_mtv - "How do I use storage copy offload?" → Planning
#about-storage-copy-offload_vmwareor Migration#proc_storage-copy-offload-cli_vmware - "How do I schedule target VMs?" → Migration
#con_scheduling-target-vms-intro_mtv - "How do I schedule importer pods?" → Planning
#about-scheduling-importer-pods_vmware - "LUKS / encrypted disks?" → Planning
#con_migration-of-luks-encrypted-disks_vmware - "NBDE / Clevis?" → Planning
#proc_enabling-nbde-with-clevis_vmware - "How do I uninstall MTV?" → Migration
#uninstalling-mtv-ui_mtv(UI) or#uninstalling-mtv-cli_mtv(CLI) - "What is must-gather?" → Migration
#using-must-gather_mtv - "User-defined networks / UDN?" → Migration
#about-udn_mtv - "Raw copy mode?" → Migration
#raw-copy-mode_mtv - "virt-v2v?" → Migration
#virt-v2v-mtv_mtv - "Non-admin permissions?" → Planning
#non-admin-permissions_cli - "Operator parameters?" → Planning
#ref_mtv-operator-parameters_mtv - "Max concurrent VMs?" → Planning
#ref_max-concurrent-vms_mtv - "VMware privileges?" → Planning
#vmware-privileges_mtv - "Network ports?" → Planning
#ports_mtv - "Software compatibility?" → Planning
#compatibility-guidelines_mtv - "VMware plan settings / templates?" → Planning
#configuring-vmware-plan-settings_vmware - "Tips and tricks?" → Planning
#tips-and-tricks-panel_mtv - "MTV settings?" → Planning
#overview-settings-tab_mtv - "Transfer network?" → Planning
#choosing-controller-transfer-network_mtv - "Understanding MTV migration?" → Migration
#assembly_understanding-mtv-migration_mtv - "MTV custom resources?" → Migration
#mtv_custom_resources - "Device compatibility mode?" → Migration
#con_device-compatibility-mode-raw-copy-migrations_mtv