h3c-network-device

name: h3c-network-device description: H3C (HP Enterprise) network device (switch/router) operations: display vlan, interface, version, ip route, ospf, bgp, rip, bfd, nat, acl, stp, power, fan, temperature, cpu, memory, link-aggregation. Uses SSH. activation_keywords: [h3c, hp, comware, router, switch, display, vlan, interface, ospf, bgp] execution_mode: client

H3C Network Device Skill

Provides H3C (HP Enterprise / Comware) network device (switch/router) operations via SSH.

Switching Operations

• VLAN: display vlan
• Interface: display interface brief
• MAC: display mac-address
• STP: display stp brief

Routing Operations

• IP Route: display ip routing-table
• IP Route Verbose: display ip routing-table verbose
• FIB: display fib
• Routing Statistics: display routing-table statistics

Protocol Operations

• OSPF Neighbor: display ospf peer
• OSPF Interface: display ospf interface
• OSPF LSDB: display ospf lsdb
• BGP Peer: display bgp peer
• BGP Routing Table: display bgp routing-table
• RIP Neighbor: display rip neighbor
• RIP Route: display rip route

BFD

• BFD Session: display bfd session

NAT & ACL

• NAT Session: display nat session
• NAT Server: display nat server
• ACL: display acl all

System Operations

• Version: display version
• Device: display device
• Power: display power
• Fan: display fan
• Temperature: display temperature
• CPU: display cpu
• Memory: display memory
• Clock: display clock
• QoS: display qos policy
• Link Aggregation: display link-aggregation verbose
• Port Isolate: display port-isolate group

Use builtin_h3c_switch tool with fields:

• operation: Operation name
• host: Device IP address or hostname
• port: SSH port (default: 22)
• user: SSH username (default: admin)
• password: SSH password
• command: Custom display command (optional)

Example:

operation: "display_ospf_neighbor"
host: "192.168.1.2"
user: "admin"
password: "H3CPass123"

Example - check routing table:

operation: "display_ip_route"
host: "192.168.1.2"
user: "admin"
password: "H3CPass123"

Example - check BGP:

operation: "display_bgp_peer"
host: "192.168.1.2"
user: "admin"
password: "H3CPass123"

Note: Requires SSH access to the H3C device. Commands are read-only (display only).