openspec-propose

name: openspec-propose description: Propose a new change with all artifacts generated in one step. Use when the user wants to quickly describe what they want to build and get a complete proposal with design, specs, and tasks ready for implementation. license: MIT compatibility: Requires openspec CLI. metadata: author: openspec version: "1.0" generatedBy: "1.2.0"

Propose a new change - create the change and generate all artifacts in one step.

I'll create a change with artifacts:

• proposal.md (what & why)
• design.md (how)
• tasks.md (implementation steps)

When ready to implement, run /opsx-apply

Question-asking discipline (read first)

The propose phase is where every clarifiable architectural decision must be settled. Apply phase is not the time for clarifications — by the time code is being written, the user must not be paying a clarification tax that should have been paid here.

• Ask the user now, do not defer to apply. The upstream OpenSpec default "prefer making reasonable decisions to keep momentum" is overridden for this project. If a decision is architecturally meaningful and ambiguous (placement / provider / data scope / settings storage / key handling / transactional boundaries / error-handling pattern / logging strategy / library / БСП subsystem / platform-version target / public common-module signatures), ask the user here, not at apply time.
• Do not ask the user about facts an MCP call could close. Names, attributes, tabular sections, БСП subsystem availability, platform-API signatures — resolve via recall / resolve_qualified_name / search_metadata / ssl_search / docinfo before reaching for AskUserQuestion.
• Pin defaults the user is unlikely to care about with a one-line rationale in design.md and move on. Do not ask about cache-eviction policy, private helper names, internal module splits when no NFR or convention exists.
• The full rule lives in content/rules/sdd-integrations.md → Propose-phase clarification discipline. Load it before authoring any non-trivial proposal.

Forbidden in finalized artifacts (each is a propose-phase defect of the same severity as a missing Context sources block):

• "TODO: clarify with the user during apply" / "уточнить при реализации" — every such marker is an admission that this phase failed. Either decide now with the user, or capture as a numbered item in design.md → ## Open Questions with the exact future question, the artifact section it will update, and the dependent task ID — and only if the answer genuinely depends on facts that surface later, not on a user decision you skipped asking.
• "We'll decide once we see the code" / "будем смотреть по ходу" — almost never legitimate.
• Vague verbs in delta ### Requirement: blocks: "appropriately", "if needed", "as required", "по необходимости", "при необходимости".
• Phantom defaults — two equally weighted options listed without a written rationale for the default.

Input: The user's request should include a change name (kebab-case) OR a description of what they want to build.

Steps

1. If no clear input provided, ask what they want to build

   Use the AskUserQuestion tool (open-ended, no preset options) to ask:

   "What change do you want to work on? Describe what you want to build or fix."

   From their description, derive a kebab-case name (e.g., "add user authentication" → add-user-auth).

   IMPORTANT: Do NOT proceed without understanding what the user wants to build.

2. Create the change directory

   openspec new change "<name>"
   

   This creates a scaffolded change at openspec/changes/<name>/ with .openspec.yaml.

3. Get the artifact build order

   openspec status --change "<name>" --json
   

   Parse the JSON to get:

   • applyRequires: array of artifact IDs needed before implementation (e.g., ["tasks"])
   • artifacts: list of all artifacts with their status and dependencies

4. Create artifacts in sequence until apply-ready

   Use the TodoWrite tool to track progress through the artifacts.

   Loop through artifacts in dependency order (artifacts with no pending dependencies first):

   a. For each artifact that is ready (dependencies satisfied):

   • Get instructions:

     openspec instructions <artifact-id> --change "<name>" --json
     

   • The instructions JSON includes:
     • context: Project background (constraints for you - do NOT include in output)
     • rules: Artifact-specific rules (constraints for you - do NOT include in output)
     • template: The structure to use for your output file
     • instruction: Schema-specific guidance for this artifact type
     • outputPath: Where to write the artifact
     • dependencies: Completed artifacts to read for context
   • Read any completed dependency files for context
   • Create the artifact file using template as the structure
   • Apply context and rules as constraints - but do NOT copy them into the file
   • Show brief progress: "Created "

   b. Continue until all applyRequires artifacts are complete

   • After creating each artifact, re-run openspec status --change "<name>" --json
   • Check if every artifact ID in applyRequires has status: "done" in the artifacts array
   • Stop when all applyRequires artifacts are done

   c. If an artifact requires user input (unclear context):

   • Use AskUserQuestion tool to clarify now, not later. Apply phase will not get a second chance to ask routine architectural / scope / naming questions.
   • Then continue with creation

5. Pre-finalization clarification gate

   Before declaring "All artifacts created! Ready for implementation.", run a final consolidation pass:

   a. Re-read every ### Requirement: in delta specs/ and every decision in design.md. For each one: can the implementer execute the code that satisfies this requirement / decision from the artifacts alone, without a follow-up question to the user? Any "no" → add to a single batched question list.

   b. Re-read proposal.md → Constraints / Out of scope / Non-goals. For each scope edge: is the wording sharp enough that an implementer cannot accidentally cross it? Sharpen now, or batch a clarification.

   c. Re-read tasks.md. Each task should be executable from the current artifacts alone. Tasks like "implement reasonable defaults" or "decide between approaches" indicate the gate is not yet passed — settle the choice in design.md, then re-write the task.

   d. Audit design.md → ## Open Questions. Each entry is a promise that the user will be asked again at apply time. Allowed only if the answer genuinely depends on facts that surface later (production data, performance measurements, a not-yet-implemented module's actual shape). "I forgot to ask" / "user wasn't sure yet" / "let's see what apply finds" — not legitimate. Either close the question now (with a CONFUSION block to the user) or remove it.

   e. If the batched question list is non-empty — present it to the user in one consolidated AskUserQuestion round (open-ended for free-text answers, preset options where applicable). Apply the answers to the artifacts. Then re-run the gate. Repeat until the batched list is empty.

   The proposal is "ready" only when this gate passes: empty batched list, every artifact internally consistent, ## Open Questions contains only items that legitimately depend on later facts.

6. Show final status

   openspec status --change "<name>"
   

Output

After completing all artifacts, summarize:

• Change name and location
• List of artifacts created with brief descriptions
• What's ready: "All artifacts created! Ready for implementation."
• Prompt: "Run /opsx-apply or ask me to implement to start working on the tasks."

Artifact Creation Guidelines

• Follow the instruction field from openspec instructions for each artifact type
• The schema defines what each artifact should contain - follow it
• Read dependency artifacts for context before creating new ones
• Use template as the structure for your output file - fill in its sections
• IMPORTANT: context and rules are constraints for YOU, not content for the file
  • Do NOT copy <context>, <rules>, <project_context> blocks into the artifact
  • These guide what you write, but should never appear in the output

Guardrails

• Create ALL artifacts needed for implementation (as defined by schema's apply.requires)
• Always read dependency artifacts before creating a new one
• Ask the user about every ambiguous architectural / scope / naming / placement / storage / library / БСП / transactional decision during this phase — do NOT defer to apply. "Prefer making reasonable decisions to keep momentum" is not the rule for this project; the rule is in content/rules/sdd-integrations.md → Propose-phase clarification discipline.
• Resolve facts the project already knows (recall) or that an MCP call can close (resolve_qualified_name, search_metadata, ssl_search, docinfo) before reaching for AskUserQuestion.
• The pre-finalization clarification gate (step 5) is non-negotiable. Declaring "Ready for implementation" with TODO: clarify during apply markers, vague requirement verbs ("appropriately", "if needed"), or ## Open Questions items that the user could have answered now is a propose-phase defect.
• If a change with that name already exists, ask if user wants to continue it or create a new one
• Verify each artifact file exists after writing before proceeding to next